How to adjust the steps and daily maintenance items of the shot blaster of the through shot blasting cleaning machine

The through type shot blasting machine relies on the precise high-speed shot blasting machine to shoot onto the surface of the workpiece, remove rust and dirt on the surface of the workpiece, strengthen the internal molecules of the workpiece, make the internal molecules of the workpiece more closely arranged, and thus enhance the mechanical performance of the workpiece.

It should be noted that the shot blasting machine mainly relies on the shot blasting machine for shot blasting, and if the shot blasting machine is high-speed for a long time, there may be a difference in the shooting position due to the force. In this case, it is necessary to adjust the shot blasting machine. How to adjust the shot blaster? Many people are not familiar with it, but in fact, the method is very simple, which is to adjust the position of the directional sleeve so that all projectile shots fall on the cleaned workpiece. Check whether the position of the adjusted directional sleeve is accurate. Simply use a wooden board or white paper to replace the cleaned workpiece. Start the shot blaster, input a small amount of shot material, check the position of the shot belt, and finally adjust the position of the directional sleeve to the appropriate position.

It should be noted that after the directional sleeve of the through type shot blasting machine is adjusted, a load test can be carried out to ensure that the equipment is in good operation. After half an hour of shot blasting, the addition of shot material can be carried out, which can improve the efficiency and effectiveness of shot blasting cleaning of the equipment. If you are not clear about the adjustment techniques of the shot blasting machine, you can also consult the technical personnel of the equipment manufacturer.

As the most commonly used equipment for surface finishing in the casting profession, the shot blasting machine is often used in daily use due to the continuous high-speed shot blasting operation of heavy castings. Therefore, the wear and tear of the shot blasting machine is still significant. Therefore, in daily use, it is necessary to cultivate the maintenance of the shot blasting machine through the type of shot blasting machine. As long as the daily maintenance work of the shot blasting machine is done properly, Only then can the service life of the shot blasting machine be more durable, and the production power of the casting be increased. Moreover, the strength of the surface finishing of the casting can be improved to meet the requirements of application.

1. The operation position of the shot blasting machine belongs to a special position. If you want to engage in the operation position of the shot blasting machine, you must first pass the job training, and after receiving relevant training on the shot blasting machine, you can only take up the job as long as you are familiar with it. In the training of the shot blasting machine, there is a very good explanation about the daily maintenance of the shot blasting machine.

2. Because the shot blasting machine needs to be used every day, it is necessary to register the equipment management log of the shot blasting machine when using it. The registration content of the log should include the daily maintenance time, maintenance items, and weekly maintenance records of the equipment.

3. Before starting the shot blasting machine every day, timely dust removal and debris sorting operations should be carried out, and timely lubrication and maintenance should be carried out on the shot blasting machine.