The basic principle of the through shot blasting cleaning machine is as follows:

1、 Clean up the room

The cleaning room is a large chamber plate box shaped assembly welding structure, with an inner wall lined with ZGMn13 wear-resistant protective plate. The cleaning operation is carried out in a sealed chamber.

2、 It's a conveyor roller

Split chamber conveyor roller and material section conveyor roller.

The high chromium wear-resistant sheath and limit ring are used for indoor roller tracks, while the high chromium wear-resistant sheath is used to protect the roller tracks and withstand bullet strikes. The limit ring can make the workpiece work according to the designated position, prevent deviation, and avoid accidents.

3、 Winch

It mainly consists of upper and lower transmission, cylinder, belt, hopper, etc. The pulleys of this elevator with the same diameter are made of reinforced plates, which are welded to the wheel hub group into a polygonal structure to enhance friction, avoid slipping, and extend the service life of the belt. The cover of the winch is bent into shape, and the hopper and the cover of the winch can be replaced by opening the middle cover of the winch. Opening the cover plate of the lower shell can eliminate the blockage of the bottom bullet. Adjusting the bolts on both sides of the upper shell of the hoist to drive the pull plate up and down can maintain the tightness of the lifting belt. The upper and lower pulleys adopt square seat outer spherical ball bearings, which automatically adjust when subjected to vibration and impact, and have good sealing performance.

4、 Separator

The spiral conveyor mainly consists of a reduction motor, a spiral shaft, and a spiral body shell.

5、 The outer spherical shaft with square seat can automatically adjust when subjected to vibration and impact, with good sealing performance.

6、 Delivery pipeline

The shot discharge pipeline has a dual control shot discharge function, and a shot discharge device is installed above each shot discharge pipeline to cut off the shot discharge devices from the separator for easy maintenance of each shot discharge device; The opening size of the shot discharge device can be adjusted according to the flow rate of the shot discharge or any combination according to the specifications of the shot discharge workpiece. The shot discharge device can be opened or closed to save energy, reduce machine wear, and ensure that production needs are met.

7、 Shot blasting machine

Using a single disc shot blaster has become the perfect high-level shot blaster in China today. It mainly consists of a rotating mechanism, impeller, casing, directional sleeve, shot wheel, protective plate, etc. The forged impeller is made of Cr40 material, and the blades, directional sleeve, shot wheel, and protective plate are made of high chromium chromium.

8、 Purification device

This machine adopts a high-pressure fan, and the auxiliary chamber is equipped with multiple elastic blowing nozzles at different angles, which can blow and remove the remaining projectiles on the surface of the workpiece.

9、 Import and Export

The workpiece feeding sealing devices of this utility model are all made of rubber spring steel plates. To prevent shot splashing and cleaning during shot blasting, multiple reinforced seals are installed at the workpiece feeding position. Its characteristics are strong elasticity, long service life, and good sealing effect.

10、 Dust removal system

Bag dust collector, mainly composed of bag dust collector, fan, dust removal pipeline, etc. The dust collection rate can reach 99.5%.

11、 Electrical control

The electronic control system adopts conventional control methods to achieve control of the entire machine. It uses high-quality components from both domestic and foreign sources, which have advantages such as high reliability and easy maintenance. The main power circuit is composed of a small circuit breaker and a thermal relay, which can achieve short circuit, phase loss, and overload protection for each motor. And it is equipped with multiple emergency stop switches to facilitate emergency parking and prevent accidents from expanding. Each door of the cleaning room and cleaning room is equipped with a safety protection switch, and the shot blasting machine cannot be started when any maintenance door is opened.