The mesh belt through type shot blasting machine is a new type of specialized shot blasting equipment designed and manufactured according to user requirements. It is a practical shot blasting equipment for removing disc shaped, sheet shaped, and collision resistant castings, bodies, and clumps. Automobile, aerospace, railway, and engine machinery manufacturing industries. Chain type metal mesh belt shot blasting machine allows parts to pass through automatically and continuously, receiving multi-directional shot blasting and cleaning. This series of products is mainly used for surface shot blasting of small parts such as thin-walled castings, thin-walled cast iron or aluminum alloy fragile castings, ceramics, and can also be used for shot blasting strengthening of mechanical parts. Having good coherence, high cleaning efficiency, small deformation, and no pits; It can also be used alone or connected to a circuit.

Another feature of this shot blasting device is the use of a magnetic valve with patented abrasive flow control technology, achieving accurate, adjustable, and repeatable control of abrasive flow. Whether using steel shot or steel sand, the flow control magnetic valve can ensure the control of shot flow, and an electromagnetic controller is used to control the flow. Easy to install control devices, with remote and close range control capabilities, reducing production time, improving production capacity, and optimizing pill flow. The arrangement of the shot blasting chamber and the shot blasting device of the shot blasting machine is determined by computer three-dimensional dynamic shot simulation. By using four Q0400 high-speed shaft seat centrifugal shot blasting devices, the shot blasting efficiency has been significantly improved, achieving satisfactory shot blasting quality and effectively avoiding the situation of shot blasting blocking and burning the motor. The thickness of the hot zone of the shot blasting machine's protective plate can reach 12mm, and the special shot splitting structure enables the shot blasting utilization rate to reach 95%. In China, this technology is unique to our company. The chamber of the shot blasting mechanism is welded with 10mm thick steel plates to form a box structure, with high strength and no vibration. The interior is equipped with a 12mm bulletproof 13mm (with a service life of over 5 years), and the protective plate is connected with a stop, effectively extending the endurance of the chamber. It can also fully utilize the bounce of the projectile to form a secondary cleaning and shot peening tank. The front and rear sealing boxes are sealed with V-shaped devices with loose leaf springs, which can effectively prevent shot blasting and splashing, reduce wear and scratches on the parts, and the other sealing layers are sealed with high wear-resistant rubber plates. To reduce friction on the bottom hopper during shot blasting, buffer angle steel is added to the bottom hopper. In order to prevent material deviation during the processing of the workpiece, the shot blasting machine has installed baffles at both ends of the mesh belt. The opening of the shot blasting mechanism can be determined based on the size of the workpiece, reducing unnecessary energy waste and unnecessary ring breakage.