What are the functional characteristics of the roller through shot blasting machine?

The roller through type shot blasting machine is a conveyor roller that adjusts the speed through electrical control to transport steel structural components and steel to the blasting area inside the cleaning machine room of the equipment. The steel surface is hit and rubbed by strong bullets from different directions inside the equipment, which can clean the oxide skin, rust layer, and dirt on these steel surfaces. The treated steel surface is cleaner, and the treated steel can be unloaded by cleaning the roller tracks at both sides of the outdoor inlet and outlet.

The projectiles and rust that fall onto the steel are blown away by the blowing device. The mixture of projectiles that fall is transported by the recovery screw to the chamber funnel, and the vertical and horizontal screw conveyors gather at the lower part of the elevator and lift it into the separator at the upper part of the machine. The separated pure projectiles fall into the separator material hopper and undergo shot blasting recycling.

Dust is generated during the shot blasting process of the roller through shot blasting machine and is sent to the dust removal system through the suction pipe. The purified purified gas is discharged into the atmosphere. Particle dust is captured and collected. The roller through shot blasting machine is mainly used for stress and surface rust removal of large I-beams and other high steel structural components in industries such as construction and bridges.

Through type shot blasting machine

The roller pass type shot blasting machine is mainly used to clean and strengthen the surface of welded parts of steel structures, H-beams, steel plates, and other types of steel. Commonly used industries include automobiles, tractors, motors, valves, and other fields. This equipment can quickly clean the surface of workpieces, improve their cleanliness, and improve the coating quality of workpieces

The roller pass type shot blasting machine has high cleaning quality, compact design structure, small footprint, flexible use, and no need for complex installation process. The roller through shot blasting machine equipment can be used to handle some heavier or longer sized workpieces, which is incomparable to other stabbing equipment. It is important that this type of equipment also meets environmental standards for air emissions when removing dust.

Characteristics of the Through Shot Blasting Machine

1. Compact structure, high efficiency, good cleaning quality, safe and reliable operation, and stable operation

2. The cleaning room adopts high chromium steel protective panels, which are wear-resistant, impact resistant, and have good strength

3. Powered drum conveyor is used. It can pass through heavy and ultra long workpieces

4. Secondary dust removal (cyclone dust removal, bag filter), with high suction air volume, clean dust filtration, and air emissions meeting environmental standards